10 Best Oil Extractor For Car Recommended By An Expert

Features :

• Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It’s high efficiency, rapid and saving effort.
• Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process.
• Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on.
• Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC).
• What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase.

Features :

• 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
• 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
• 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
• 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.
• 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers.

Features :

• 【Specificaiton】: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min
• 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
• 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
• 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
• 【Package Included】: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps

Features :

• Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more.
• The pump includes two a 7-Inch by 1/4-Inch (outer diameter) hose extension for deep reach and small diameter applications, locking cap on end of hose and a 7.5-Inch/19-Centimeter clear hose.
• The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger.
• Heavy-duty construction allows for strength and durability.

Features :

• SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky.
• QUICK OIL CHANGE – DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m).
• UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil.
• ACCESSORIES & PRECAUTIONS – The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes.
• THINKWORK GUARANTEE SERVICE – we provide satisfactory and reliable customer service. If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.

Features :

• CAREFREE CAR AND BOAT CARE: This versatile fluid evacuator pump allows for the easy removal of engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more
• EASY OIL CHANGE: No more crawling under cars for oil changes; This topside oil extractor pump pulls oil from the dipstick, allowing you to stay right side up the whole time
• MOVE FLUID WITH LESS MESS: The automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor
• LONGER REACH: The 5 foot long flexible main suction hose connects to the improved 41 inch long dipstick hose adapter or to the 17 inch long suction hose adapter for plenty of reach
• PUMP FOR JOY: The manual extraction pump quickly extracts up to 1.4 gallons (5.3L); No compressed air is required for fast, easy, and effective fluid extraction

Features :

• NEW SMALL PUMPS – portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.
• QUICK OIL CHANGE – DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m).
• SAFE & SIMPLE OPERATION – Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F (40℃-60℃) about 15 minutes to avoid clogging the oil pump due to oil solidification.
• HIGH-Current ALLIGATOR: Fully surrounded handle, effectively preventing leakage or short circuit. This clip is made of pure copper with good electrical conductivity, corrosion resistance and rust free.
• MULTIFUNCTIONAL OIL EXTRACTOR PUMP- The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

Features :

• 【 Work Freely 】 Portable 6 liters sturdy and lightweight reservoir for changing oil in equipment. Perfect for carrying around to complete various fluid extraction jobs for routine maintenance of vehicle parts like brakes or gears.
• 【 Easy to Use 】 With a good number of strokes, the pump will create vacuum that triggers a powerful suction. Calibrated tank allows user to tell how much fluid has been removed. Included a pour spout and sealing cap available to aid in safety and neatly emptying.
• 【 Great Value for the Money 】 No need to crawl under the car to drain out the oil anymore! The manual oil extractor pump vacuums fluid from inaccessible or confined areas. Also works perfectly for low viscosity fluids such as trapped water or coolant.
• 【 Wide Applications 】 EWK oil extractor is designed to drain bad fluids from cars, motorcycles, lawnmowers, marine engines, watercrafts, stationary engines and industrial machinery. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor.
• 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance.

Features :

• [Upgrade] The maximum power is upgraded from the previous 60W to 80W, and the overload protection is upgraded to increase safety protection for your operation.In addition, you will get 1 additional outlet hose, 1 inlet hose, 4 hoses in total, but our price remains the same.
• [Measured extraction speed]Under the premise of engine oil heating, the speed can reach 0.3gal/min, while the diesel extraction speed is 0.6-1gal/min, Voltage: 12V, maximum current: 7A, maximum power: 80W. According to the arrow Install the hose, Inlet Hose is thin, Outlet Hose is thick
• [Safe Operation]: To pump oil properly, before use, please heat the car engine to 104°F-140 °F (40℃-60℃) for about 15 minutes to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline. Do not use this fluid oil change pump to extract water, gearbox oil, or easily flammable liquids (fuel, petrol, etc).
• [Application] This oil transfer pump can change engine oil and diesel for cars, boats, motorbikes, trucks, RV and ATV, and other 12V vehicles.
• [What you get]: Package included: 1 x Pump; 2 x Outlet Hose; 2 x Inlet Hose; 4 x Hose Clamps; 2 x Battery Clamps. Service warranty: 12month warranty and friendly customer service. Please contact us via email if has any question.

Features :

• Simply pump operation for easily remove the liquid.
• Transparent hose allows visual inspection of fluid extraction. Extra hose placement for easy to storage. Durable metal pedal to fix the tank when operating.
• Can be used to extract engine oil from,brake fluid and lubricant oil from machine and car,water from fish tank and more.
• Specification: Item Size: 68*24*22cm，Tank Capacity:7L，Working Pressure: 70-170PSI
• Fit for most fluid extraction applications.