Top 10 Best Co2 Tire Inflators In 2022

Features :

• 【Get Back Riding Fast】: The CO2 Inflator Set (CO2 Cartridges x 4/ CO2 Inflator/ insulate sleeve) is a new standard of threaded CO2 Cartridge, perfect for whether your going on tough mountain range rides, or in need of fast air pressure during hot pursuit racing! With the 16g threaded cartridges, it can fill a large (26” x 1.95”) MTB tire to 40psi (2.7bar) in a single shot, now that’s impressive! Get yourself back on the trail quick and conveniently with the handy 16 gram threaded CO2 cartridge
• 【Super Compact and Lightweight】: CO2 Inflator fit Presta & Schrader valve, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort. But please note that you’ll more than likely find that your tire will be flat within 24 hours because CO2 will leak out of your tire faster than air. So don’t forget to pump it up before your next ride
• 【Compatible for all Threaded CO2 Cartridges】: Inflator head designed for any size of threaded CO2 cartridges. Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to use the insulate sleeve(include) to protect your hands. Once you’ve finished inflating your tire, Don’t leave it on the side of the road for someone else to pick up. CO2 canisters are RECYCLABLE and one-time use only
• 【Perfect for Road/ Mountain Bike Tires】: 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch; care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons – do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas
• 【WARNING】: Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly.

Features :

• ★Classic, Durable, Compact and Lightweight design.BriskMore CO2 Inflator Set has one inflator head, 5 units 16g 3/8 sized threaded CO2 cartridges and insulate sleeve for 16g cartridges only.
• ★ Fits both Presta & Schrader valves. Washers seal threaded connection ensuring NO leakage. Inflator head designed for all threaded size UNF3/8 CO2 cartridges(12/16/20/25g).
• ★ Inflatore head made from strong and durable aluminium alloy and alloy steel. CNC precisely machined and heat-treated. Three additional spare washers included. Each cartridge is filled with 16 grams of the highest quality industry-grade CO2. Weighing only 2 ounces / 58 grams each. Made from 100% recycled steel.Zinc coating prevents rust on the charger.Fits most standard 3/8″ threaded CO2 bike inflator heads.
• ★Inflator head has reliable and simple control valve for precise adjustment, easy to use. Inflates in seconds and gets you riding again quickly. Original Design,Patented Product.
• ★Satisfaction Guaranteed: Both customer satisfaction and product quality are very important to us. So if you encounter any problems, We can provide a full Refund or a Replacement and lifetime warranty!

Features :

• ★Classic, Durable, Compact and Lightweight design. Insulted Rubber foam sleeve(for 16g cartridges only) included to prevent frozen fingers when operating.
• ★ Fits both Presta & Schrader valves. Washers seal threaded connection ensuring NO leakage. Inflator head designed for all threaded size UNF3/8 CO2 cartridges(12/16/20/25g). CO2 cartridges NOT included.
• ★ Made from strong and durable aluminium alloy and alloy steel. CNC precisely machined and heat-treated. Three additional spare washers included.
• ★Reliable and simple control valve for precise adjustment, easy to use. Inflates in seconds and gets you riding again quickly. Original Design,Patented Product.
• ★Satisfaction Guaranteed: Both customer satisfaction and product quality are very important to us. So if you encounter any problems, We can provide a full Refund or a Replacement and lifetime warranty!

Features :

• Get Back Riding Quickly with Super Fast & Reliable Tire Inflation – Inflate a tire in seconds with our 1-Turn Valve System. Control lever operation regulates speed of CO2 release for precisely controlled inflation. Twin valve head threads onto either Presta & Schrader valves with no valve head switching needed.
• Small, Compact & Lightweight – Read the amazing reviews, customers love this stylish CO2 inflator for its compact small size which is perfect for stowing away in your saddle bag or cycling jersey pocket. Check out our ‘How to Video’ & Buying Guide’ videos in the ‘Related Video Shorts’ section.
• Safe & Secure Connection with No Leaks – Inflator head designed for ANY size of ‘threaded’ CO2 cartridges (12g, 16g, 20g & 25g). Rubber EVA Foam sleeve (for 16g cartridges only) included – no frozen fingers when operating. Detailed instructions included. Important note: Not compatible with valve extenders. For Presta valves with removable cores, extra care should be taken to tightly screw the core into the valve stem. No CO2 cartridges included, CO2 cartridges sold separately.
• Save Money in The Long Term, Invest In The Best – Why spend money on a cheaper CO2 inflator which will inevitably fail when you need it the most! This CO2 inflator is made from superior quality CNC machined aluminum alloy with durable and precise parts, which is built to last, so you can have a safe & enjoyable ride. Important: For safety reasons – do not screw in and store a CO2 cartridge into the inflator head until needed for operation. Care & respect should be taken when using CO2 gas.
• Pro Quality – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement! We recommend only using premium quality threaded CO2 cartridges for ‘best performance’, such as PRO BIKE TOOL’s threaded 16g CO2 cartridges. Note: Using low quality CO2 cartridges with potentially poor quality threads and seals can potentially damage the CO2 inflator head and therefore ‘fail’ when most needed!

Features :

• Inflate a tire in seconds. No pumping. No waiting. No hauling around bulky bike pumps. Combined with an inflator head (not included), Gorilla Force CO2 cartridges are the fastest way to get back on the saddle.
• Premium CO2 cartridges. Our factory was qualified by Intertek in 2020 to be ISO:9001 compliant. Translation: certified processes, checks, and tests are in place to crank out consistent, high-quality cartridges. If you do have any problem with your order, please let us know and we’ll make it right.
• 16g is the most popular CO2 cartridge size by far. They’ll fit any inflator head designed for threaded cartridges. Check out our larger 25g cartridges if you have bigger 29″ or “fatty” mountain bike tires: same thread size, more CO2.
• Single-use and recyclable. They have 16 grams of CO2 inside them, which means they weigh 59 grams when full and 43 grams when empty. They are not refillable, but they are made of steel and can be recycled.
• 99.99% pure CO2 with no additives or preservatives. They never expire and can be stored between sub-zero and 120 degrees F. Not certified for use with food products.

Features :

• INFATES QUICKLY – CNC machined aluminum dispenser with brass internals. Upgrade design with control lever operation regulates speed of CO2 release for easy precisely controlled inflation. Also ‘slowly’ releasing the gas into a tire to control potential freezing.
• COMPACT, PORTABLE & LIGHTWEIGHT – The CO2 inflator is compact small and lightweight, simple design so it’s easy to use and feels solid in use.
• SAFE & SECURE CONNECTION WITH NO LEAKS – CNC machined aluminum parts for precise and durable construction. Inflator head designed for all ‘threaded’ UNF3/8 CO2 cartridges(12/16/20/25g). It is Presta & Schrader valves compatible.
• WHY MUST BE A CO2 INFLATOR – It is efficiently & reliably delivers ‘fast inflation’ when you need it the most. So it is a good choice for a race, group ride or timed event.
• PRO QUALITY – We are so confident about the quality of our products that if you have any product issues, we’re very happy to either provide a Refund or a Replacement! We recommend only using premium quality threaded CO2 cartridges for ‘best performance’.

Features :

• We don’t throw the word “ultra” around lightly! Comfortable, durable and most of all reliable, our Ultraflate is our most tried and true cupped inflator.
• Trigger-controlled technology for fast, easy and controllable CO2 inflation that can take the strain of everyday use and still maintain precision inflation performance
• Built-in “trigger lock” to prevent accidental discharge and works with both Presta and Schrader valves
• Size: 2.17″ L x 0.73″ W x 1.38″ H, Inflator Head Weight: 62 grams, Product includes (1) Ultraflate inflator head and (1) non-threaded 20 gram CO2 cartridge
• Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges

Features :

• Quickly & Easy Inflate In Seconds – Our mini CO2 bike tire inflator can help you inflate a flat in seconds and get back to riding, easily operated, just insert CO2 cartridge (not included) to this head to inflate, Control lever operation regulates speed to precisely control the C02 inflation.
• Portable, Compact & Lightweight – Our bicycle tire pump for road and mountain is small size, you can put the mini bike pump CO2 inflator in your saddle bag or pocket, and absolutely it is the most convenient CO2 inflator for bike tire.
• Durable Materials & Good Process – Our bike CO2 inflator kit is made from high-end quality aluminum alloys CNC processing, which ensure all parts are durable and accurate. Simple control valve for precisely adjustment, easy to use. AND IT will help you get back riding quickly. Insulted Rubber foam sleeve (for 16g cartridges only) included to prevent frozen fingers when operating.
• Safe & Secure Connection With No Leaks – Bike Tire Inflator head designed with seal threaded connection, and can be adapted for ANY size of ‘threaded’ CO2 cartridges (12g, 16g, 20g & 25g). The mini bike pump can handle any valve type, Rubber EVA Foam sleeve included – no frozen fingers when operating.
• Best Bike Tools for Cyclist – Our bike tool mini bike pump CO2 inflator can help you get riding in seconds, and we are confident with the quality of CO2 tire inflator hand pump, please feel free to contact us if you have any issues about the product, We can provide a full Refund or a Replacement and lifetime warranty! Note: Not compatible with valve extender. No CO2 cartridges included

Features :

• EVERYTHING YOU NEED FOR A FLAT– The CO2 Tire Inflation Kit gets you back on the road quicker by including solutions for all of you flat tire needs. Bike Tire Repair Set includes: 16g CO2 cartridges x 5, CO2 inflator X1, insulate sleeve X1, tire levers X 3, round punch X6, metal rasp X1
• GET BACK RIDING FAST– Use your tire levers, Take the tire out of the bead, Locate where the air is escaping from. Use metal rasp tool to rough up the area around the puncture so that your adhesives have something to grip. Then press glueless punch firmly over the hole.
• SUPER COMPACT AND LIGHTWEIGHT– CO2 Inflator fit Presta & Schrader valve, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort.
• PERFECT FOR ROAD/ MOUNTAIN BIKE TIRES– 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch; care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons – do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas
• WARNING– Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly.

Features :

• Our Microflate Nano gives you the best bang for your buck when it comes to quality, quick inflation and ease of use
• Easy to use and fully controllable, with patented twist-to-inflate technology. Durable, reliable and compact so you can stop struggling with a bicycle hand pump
• Compact, nearly indestructible and works with both Presta and Schrader valves
• Size: 1″ L x 0.90″ W x 1.5″ H, Inflator Head Weight: 23 grams; Product includes (1) Microflate Nano inflator head and (1) threaded 20 gram CO2 cartridge
• Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges